Advanced Technology and Manufacturing Institute (ATAMI)

B. K. Paul, “An analytical model of the diffusive scattering of low-energy electrons in electron-beam resists”, Microelectronic engineering, vol. 49, pp. 233–244, 1999.

H. Wang, “An experimental study of flow boiling heat transfer enhancement in minichannels with porous mesh heating wall”, Oregon State University, Corvallis, Or., 2006.

B. K. Paul, Kwon, P., and Subramanian, R., “Understanding limits on fin aspect ratios in counterflow microchannel arrays produced by diffusion bonding”, Journal of manufacturing science and engineering, vol. 128, pp. 977–983, 2006.

A. K. Goodwin, “Conversion of glucose to hydrogen gas by supercritical water in a microchannel reactor”, Oregon State University, Corvallis, Or., 2007.

Y. - W. Su, “Fabrication and characterization of ferrimagnetic film for RF/microwave crosstalk suppression”, Oregon State University, Corvallis, Or., 2007.

V. P. Onbattuvelli, “Synthesis and characterization of palladium/polycarbonate nanocomposites”, Oregon State University, Corvallis, Or., 2007.

P. Vas-Umnuay, “Flow characterization of multiple-tube reactors for synthesis of nano-sized silicon nitride powder via silicon monoxide ammonolysis”, Oregon State University, Corvallis, Or., 2008.

J. Muirhead Parker, “A novel lattice Boltzmann method for treatment of multicomponent convection, diffusion, and reaction phenomena in multiphase systems”, Oregon State University, Corvallis, Or., 2008.

W. Wang, “Selective self-assembly of biogenic silica assisted by layer-by-layer deposition and inkjet printing”, Oregon State University, Corvallis, Or., 2008.

C. - H. Chang, Paul, B. K., Remcho, V. T., Atre, S., and Hutchison, J. E., “Synthesis and post-processing of nanomaterials using microreaction technology”, Journal of Nanoparticle Research, vol. 10, pp. 965–980, 2008.

S. R. Cadell, “Development of a heat transfer coefficient for a single mist nozzle impinging on a heated thin sheet of Alloy 304 Stainless Steel using infrared thermography”, Oregon State University, Corvallis, Or., 2009.

K. Asumpinpong, “Development of a microchannel device for adsorption cooling application”, Oregon State University, Corvallis, Or., 2009.

M. T. Koesdjojo, “Fabrication and application of polymer based microfluidic devices”, Oregon State University, Corvallis, Or., 2009.

C. Choi, “Fabrication and characterization of nanostructured surfaces for enhanced heat transfer”, Oregon State University, Corvallis, Or., 2009.

R. Ravichandran, “Fabrication and characterization of p-type CuO / n-type ZnO heterostructure gas sensors prepared by sol-gel processing techniques”, Oregon State University, Corvallis, Or., 2009.

A. Warner-Tuhy, “Mass transfer of urea, creatinine and vitamin B-12 in a microchannel based membrane separation unit”, Oregon State University, Corvallis, Or., 2009.

E. K. Anderson, “Prediction of mass transfer performance of microchannel dialyzers using deconvolution of impulse-response experiments”, Oregon State University, Corvallis, Or., 2009.

W. E. Cowell, “Amorphous multi-component metals as electrode materials”, Oregon State University, Corvallis, Or., 2010.

D. Mandrell, “Automated manipulation of zebrafish embryos for high-throughput toxicology screening of nanomaterials”, Oregon State University, Corvallis, Or., 2010.

H. Dae Jin, “Continuous and rapid synthesis of nanoclusters and nanocrystals using scalable microstructured reactors”, Oregon State University, Corvallis, Or., 2010.

A. K. Goodwin, “Conversion of biomass constituents to hydrogen-rich gas by supercritical water in a microchannel reactor”, Oregon State University, Corvallis, Or., 2010.

G. K. Lingam, “Cooling rate limitations in the diffusion bonding of large microchannel arrays”, Oregon State University, Corvallis, Or., 2010.

H. A. S. Platt, “Copper and iron chalcogenides for efficient solar absorption”, Oregon State University, Corvallis, Or., 2010.

J. H. Vlieg, “Development of a radial microlamination architecture for cylindrical microchannel arrays”, Oregon State University, Corvallis, Or., 2010.

K. J. Harada, “Development of a small scale scroll expander”, Oregon State University, Corvallis, Or., 2010.