Publications

2018

Fei Teng, (2018), Investigation of Thermal Degradation in Structural Alloys for Nuclear Power Systems, Oregon State University, Ph.D.
Hari P.N. Nagarajan, Karl R. Haapala, (2018), Characterizing the influence of resource-energy-exergy factors on the environmental performance of additive manufacturing systems, Journal of Manufacturing Systems, 48
Han Wang, Zhongxi Shao, Zhaoyan Fan, Zhenyu Han, 2018 I.E.E.E.Inter Instrumentation, et al., (2018), Optimization of laser trackers locations for position measurement,
Pei Cao, Zhaoyan Fan, Robert X. Gao, J. Tang, (2018), Design for Additive Manufacturing: Optimization of Piping Network in Compact System With Enhanced Path-Finding Approach, J. Manuf. Sci. Eng Journal of Manufacturing Science and Engineering, 140
Hao Sun, (2018), Synthesis of Mg-MOF-74 thin film on optical support and its potential application in gas sensing, Oregon State University, M.S.
Nicholas Aerne, (2018), Adhesive Properties Subject to Variation in Temperature, Thickness, and Working Time, Oregon State University,
Zhipeng Pan, A Tabei, Donald S. Shih, Hamid Garmestani, Steven Y. Liang, (2018), The effects of dynamic evolution of microstructure on machining forces, Proceedings of the institution of mechanical engineers, Part B: Journal of Engineering Manufacture, 232
Shingo Tajima, Burak Sencer, Eiji Shamoto, (2018), Accurate interpolation of machining tool-paths based on FIR filtering, Precision Engineering, 52
Harish Irrinki, John Jangam, Somayeh Pasebani, Sunil Badwe, Jason Stitzel, et al., (2018), Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion, Elsevier BV, Powder Technology, 331
John M. Lahmann, (2018), Blood Processing Technologies for Cryopreserved Transfusion Products and Extracorporeal Treatment Applications, Oregon State University, Ph.D.
Ziyan Liu, (2018), Novel Interfacial Syntheses of Covalent Organic Frameworks, Oregon State University, M.S.
Alper Dumanli, Burak Sencer, (2018), Optimal high-bandwidth control of ball-screw drives with acceleration and jerk feedback, Precision Engineering,
Somayeh Pasebani, Milad Ghayoor, Sunil Badwe, Harish Irrinki, Sundar V. Atre, (2018), Effects of atomizing media and post processing on mechanical properties of 17-4 PH stainless steel manufactured via selective laser melting, Elsevier B.V., Additive Manufacturing, 22

2017

Gustavo Henrique T. de Albuquerque, (2017), Continuous Flow Microwave-Assisted Synthesis as a Potentially Scalable Nanomanufacturing Approach,
Zhipeng Pan, Donald S. Shih, A Tabei, Hamid Garmestani, Steven Y. Liang, (2017), Modeling of Ti-6Al-4V machining force considering material microstructure evolution, The International Journal of Advanced Manufacturing Technology, 91
Shingo Tajima, Burak Sencer, (2017), Global tool-path smoothing for CNC machine tools with uninterrupted acceleration, International Journal of Machine Tools and Manufacture, 121
Somayeh Pasebani, Indrajit Charit, Ankan Guria, Yaqiao Wu, Jatuporn Burns, et al., (2017), A preliminary investigation of high dose ion irradiation response of a lanthana-bearing nanostructured ferritic steel processed via spark plasma sintering, Elsevier B.V., Journal of Nuclear Materials, 495
A Tabei, FH Abed, GZ Voyiadjis, H Garmestani, (2017), Constitutive modeling of Ti-6Al-4V at a wide range of temperatures and strain rates, European Journal of Mechanics-A/Solids, 63
Burak Sencer, Shingo Tajima, (2017), Frequency Optimal Feed Motion Planning in Computer Numerical Controlled Machine Tools for Vibration Avoidance, Journal of Manufacturing Science and Engineering, 139
Thomas Holschuh, (2017), Quantification of Reactor Kinetics Parameters during Reactor Transients using Cherenkov Light and Auxiliary Application to Nuclear Safeguards, Oregon State University, Ph.D.
Peng Wang, Zhaoyan Fan, David O. Kazmer, Robert X. Gao, (2017), Orthogonal Analysis of Multisensor Data Fusion for Improved Quality Control, J. Manuf. Sci. Eng Journal of Manufacturing Science and Engineering, 139
Elham Mirkoohi, (2017), Effect of Shape on Nanoparticle Sintering: A Molecular Dynamics Study., Oregon State University, M.S.
Yu Huang, (2017), Precursor Chemistry and Film Structure and Properties via Solution Deposition, Oregon State University, Ph.D.
Roshan Bhandari, (2017), Hybrid Desktop Processes for Integrated Deposition and Low-cost, In-situ Sintering of Metallic and Non-metallic Conductive Nanoparticles, Oregon State University,
Sultan Alsagabi, Somayeh Pasebani, Indrajit Charit, Indrajit Charit, Yuntian T. Zhu, et al., (2017), High Temperature Tensile Properties and Related Microstructural Evolution in Grade 92 Steel, Springer International Publishing, Mechanical and Creep Behavior of Advanced Materials,
Samuel T. Brannon, (2017), Half Array Architecture for Advancing Microchannel Heat Recuperation to Market, Oregon State University, Ph.D.
Jenn M. Amador, (2017), Metal-oxo Clusters as Novel Photolithographic Materials: How Understanding the Chemistry of HafSOx Informs Next-Generation Patterning Systems, Oregon State University,
Dick Chiu, (2017), Growth, Characterization and Applications of Zinc Sulfide Thin Films by Solution-Based Processes, Oregon State University,
Ryan H. Mansergh, (2017), Reaction Pathways of Oxo-Hydroxo Group 5 Clusters to Metal Oxide Thin Films, Oregon State University, Ph.D.
A Tabei, J Startt, RT Hoffman, E Yavari, C Deo, et al., (2017), Microstructural Evolution in Hot and Cold-Rolled Ti-Nb Alloy, Journal of Materials Engineering and Performance, 26
Ramya Raman, (2017), Towards a Selectively Bioactive Surface for the Removal of Circulating Endotoxin in Blood, Oregon State University, Ph.D.
Shidong He, (2017), Deposition and Characterization of Thin Films, Oregon State University, M.S.
Francis James, (2017), Robotic deburring, Oregon State University, M.S.
Amin Mirkouei, Karl R. Haapala, John Sessions, Ganti S. Murthy, (2017), A review and future directions in techno-economic modeling and optimization of upstream forest biomass to bio-oil supply chains, RSER Renewable and Sustainable Energy Reviews, 67
Patrick S. McNeff, Brian K. Paul, (2017), Predicting the Force Needed to Create a Compression Seal in an Ultrathin Elastoviscoplastic Membrane, Journal of Micro and Nano-Manufacturing, 5
Burak Sencer, Tony Schmitz, Jaydeep Karandikar, Chris Tyler, (2017), Special Issue: Enhanced ProcessMachine Interaction Through Design, Tooling, Automation, and Modeling, J. Manuf. Sci. Eng Journal of Manufacturing Science and Engineering, 140
Shalu Bansal, (2017), An Investigation on Nanoscale-shape-mediated Coupling Between Temperature and Densification in Intense Pulsed Light Sintering of Silver Nanoparticles, Oregon State University, M.S.
Deok-Hie Park, (2017), Aqueous Niobium Chemistry at Low pH: New Precursors for Oxide Thin Films, Oregon State University, Ph.D.
Kyle R. Zada, (2017), Experimental Investigation of Supercritical Heat Transfer of Carbon Dioxide in Parallel Square Microchannels with a Single-Wall Constant Heat Flux Boundary Condition, Oregon State University,
Burak Sencer, Alper Dumanli, (2017), Optimal control of flexible drives with load side feedback, CIRP Annals, 66
Dustin Z. Austin, (2017), Atomic Layer Deposition of Multi-Insulator Metal-Insulator-Metal Capacitors., Oregon State University, Ph.D
Jeromy J. Jenks, Radha K. Motkuri, Ward TeGrotenhuis, Brian K. Paul, Peter McGrail, (2017), Simulation and Experimental Study of Metal Organic Frameworks Used in Adsorption Cooling, Heat Transfer Engineering Heat Transfer Engineering, 38
Anukul Boonloed, (2017), Centrifugal Partition Chromatography, Microfabrication, and a Smartphone-based Detection Platform: Analytical Chemistry from Preparative-scale Separation to Micro-scale Analysis, Oregon State University, Ph.D.
P. Cao, J. Tang, Z. Fan, R. Gao, ASME 2017 Inter Conferences, et al., (2017), A manufacturing oriented single point search hyper-heuristic scheme for multi-objective optimization, Proc. ASME Des. Eng. Tech. Conf. Proceedings of the ASME Design Engineering Technical Conference, 2B-2017

2016

Yuanyuan Wu, (2016), Carbon Nanodots as Biolabels for Fluorescence Immunoassays, Oregon State University,
Somayeh Pasebani, Charit I., Alsagabi S.F., Wu Y., Burns J., et al., (2016), Lanthana-bearing nanostructured ferritic steels via spark plasma sintering, J Nucl Mater Journal of Nuclear Materials, 470
Gao Q., Brian K. Paul, Karl R. Haapala, Lizarazo-Adarme J., (2016), An economic and environmental assessment model for microchannel device manufacturing: Part 2 - Application, J. Clean. Prod. Journal of Cleaner Production, 120
Yagenetfere A. Alemu, (2016), Synthesis, Surface Treatment, and Characterization of Copper Indium Sulfide Quantum Dots, Oregon State University, M.S.
Brian K. Paul, Rahul Panat, Christina Mastrangelo, Dave Kim, David Johnson, (2016), Manufacturing of Smart Goods: Current State, Future Potential, and Research Recommendations, J. Micro Nano-Manuf Journal of Micro and Nano-Manufacturing, 4
Gao Q., Brian K. Paul, Karl R. Haapala, Lizarazo-Adarme J., (2016), An economic and environmental assessment model for microchannel device manufacturing: Part 1 - Methodology, J. Clean. Prod. Journal of Cleaner Production, 120