Advanced Technology and Manufacturing Institute (ATAMI)

A. D. Mason, “Effects of ultraviolet illumination and a parylene-A activation layer on the gas phase sensing characteristics of ZnO nanobridges”, Oregon State University, Corvallis, Or., 2011.

P. S. McNeff and Paul, B. K., “Predicting the Force Needed to Create a Compression Seal in an Ultrathin Elastoviscoplastic Membrane”, Journal of Micro and Nano-Manufacturing, vol. 5, p. 011005, 2017.

P. Scot McNeff, “Force Prediction in the Compression Sealing of an Ultra-thin Elastoviscoplastic Membrane”, Oregon State University, Corvallis, Or., 2016.

E. W. Miller, “Integrated dual cycle energy recovery using thermoelectric conversion and an organic Rankine bottoming cycle”, 2011.

E. Mirkoohi, “Effect of Shape on Nanoparticle Sintering: A Molecular Dynamics Study.”, Oregon State University, Corvallis, Or., 2017.

A. Mirkouei, Mirzaie, P., Haapala, K. R., Sessions, J., and Murthy, G. S., “Reducing the cost and environmental impact of integrated fixed and mobile bio-oil refinery supply chains”, Journal of cleaner production, vol. 113, pp. 495-507, 2016.

A. Mirkouei, Haapala, K. R., Sessions, J., and Murthy, G. S., “A review and future directions in techno-economic modeling and optimization of upstream forest biomass to bio-oil supply chains”, RSER Renewable and Sustainable Energy Reviews, vol. 67, pp. 15-35, 2017.

A. Mirkouei, Bhinge, R., McCoy, C., Haapala, K. R., and Dornfeld, D. A., “A Pedagogical Module Framework to Improve Scaffolded Active Learning in Manufacturing Engineering Education”, PROMFG Procedia Manufacturing, vol. 5, pp. 1128-1142, 2016.

M. Mohammadi, Jovanovic, G. N., and Sharp, K. V., “Numerical study of flow uniformity and pressure characteristics within a microchannel array with triangular manifolds”, Computers & chemical engineering., vol. 52, pp. 134-144, 2013.

M. Mohammadi, “Design of a single lamina for a microchannel dialyzer with a focus on bubble removal”, Oregon State University, Corvallis, Or., 2014.

N. Abolhassan Monfared, “Synthesis and characterization of nanoporous alumina films and their application to nanorod array fabrication”, Oregon State University, Corvallis, Or., 2011.

H. P. N. Nagarajan and Haapala, K. R., “Characterizing the influence of resource-energy-exergy factors on the environmental performance of additive manufacturing systems”, Journal of Manufacturing Systems, vol. 48, pp. 87 - 96, 2018.

J. Nammoonnoy, “A photoactivable microfluidic device for heavy metal ion extraction”, Oregon State University, Corvallis, Or., 2010.

R. P. Oleksak, “Solution-based nanomaterials and thin films for next generation electronics”, Oregon State University, Corvallis, Or., 2014.

V. P. Onbattuvelli, “The effects of nanoparticle addition on the processing, structure and properties of SiC and AlN”, Oregon State University, Corvallis, Or., 2010.

V. P. Onbattuvelli, “Synthesis and characterization of palladium/polycarbonate nanocomposites”, Oregon State University, Corvallis, Or., 2007.

B. Palanisamy, Han, S. - Y., and Paul, B. K., “A Multilayer Strategy for Improving the Abrasion Resistance of Silica Nanoparticle-Based Motheye Antireflective Coatings on Glass”, Journal of Micro and Nano-Manufacturing, vol. 4, p. 031005, 2016.

Z. Pan, Tabei, A., Shih, D. S., Garmestani, H., and Liang, S. Y., “The effects of dynamic evolution of microstructure on machining forces”, Proceedings of the institution of mechanical engineers, Part B: Journal of Engineering Manufacture, vol. 232, pp. 2677–2681, 2018.

Z. Pan, Shih, D. S., Tabei, A., Garmestani, H., and Liang, S. Y., “Modeling of Ti-6Al-4V machining force considering material microstructure evolution”, The International Journal of Advanced Manufacturing Technology, vol. 91, pp. 2673–2680, 2017.

D. - H. Park, “Aqueous Niobium Chemistry at Low pH: New Precursors for Oxide Thin Films”, Oregon State University, Corvallis, Or., 2017.

J. Muirhead Parker, “A novel lattice Boltzmann method for treatment of multicomponent convection, diffusion, and reaction phenomena in multiphase systems”, Oregon State University, Corvallis, Or., 2008.

S. Pasebani and Charit, I., “Effect of alloying elements on the microstructure and mechanical properties of nanostructured ferritic steels produced by spark plasma sintering”, Journal of Alloys and Compounds, vol. 599, pp. 206–211, 2014.

S. Pasebani, Charit, I., Butt, D. P., and Cole, J. I., “A preliminary study on the development of La2O3-bearing nanostructured ferritic steels via high energy ball milling”, JOURNAL OF NUCLEAR MATERIALS, vol. 434, pp. 282-286, 2013.

S. Pasebani, I., C., S.F., A., Y., W., J., B., K.N., A., D.P., B., J.I., C., S., P., I., C., Y., W., J., B., K.N., A., D.P., B., J.I., C., and S.F., A., “Lanthana-bearing nanostructured ferritic steels via spark plasma sintering”, J Nucl Mater Journal of Nuclear Materials, vol. 470, pp. 297 - 306, 2016.

S. Pasebani and Toroghinejad, M. Reza, “Nano-grained 70/30 brass strip produced by accumulative roll-bonding (ARB) process”, Materials science & engineering. A, Structural materials, properties, microstructure and processing., vol. 93, p. 491, 2010.