Advanced Technology and Manufacturing Institute (ATAMI)

A. Tabei, Shih, D. S., Garmestani, H., and Liang, S. Y., “Dynamic Recrystallization of Al Alloy 7075 in Turning”, Journal of Manufacturing Science and Engineering, vol. 138, p. 071010, 2016.

G. Q., Paul, B. K., Haapala, K. R., and J., L. - A., “An economic and environmental assessment model for microchannel device manufacturing: Part 1 - Methodology”, J. Clean. Prod. Journal of Cleaner Production, vol. 120, pp. 135-145, 2016.

G. Q., Paul, B. K., Haapala, K. R., and J., L. - A., “An economic and environmental assessment model for microchannel device manufacturing: Part 2 - Application”, J. Clean. Prod. Journal of Cleaner Production, vol. 120, pp. 146-156, 2016.

H. Irrinki, Dexter, M., Barmore, B., Enneti, R., Pasebani, S., Badwe, S., Stitzel, J., Malhotra, iv, R., and Atre, S., “Effects of Powder Attributes and Laser Powder Bed Fusion (L-PBF) Process Conditions on the Densification and Mechanical Properties of 17-4 PH Stainless Steel”, JOM, vol. 68, pp. 860–868, 2016.

A. Dominguez, Ali, A., Orantes, F., Ula, N., Li, Y., Foyos, J., Garmestani, H., Tabei, A., Almahmoud, K., Almahmoud, O., and others, “Evaluation of the Microstructure and Charpy Impact Toughness of Hot Worked Powder Ti-6Al-4V”, in Defect and Diffusion Forum, 2016.

P. Scot McNeff, “Force Prediction in the Compression Sealing of an Ultra-thin Elastoviscoplastic Membrane”, Oregon State University, Corvallis, Or., 2016.

B. Barmore, “Fused Filament Fabrication of Filled Polymers for Metal Additive Manufacturing”, Oregon State University, Corvallis, Or., 2016.

S. Alsagabi, Charit, I., and Pasebani, S., “The Irradiation Performance and Microstructural Evolution in 9Cr-2W Steel Under Ion Irradiation”, Journal of Materials Engineering and Performance, vol. 25, pp. 401–408, 2016.

S. Pasebani, I., C., S.F., A., Y., W., J., B., K.N., A., D.P., B., J.I., C., S., P., I., C., Y., W., J., B., K.N., A., D.P., B., J.I., C., and S.F., A., “Lanthana-bearing nanostructured ferritic steels via spark plasma sintering”, J Nucl Mater Journal of Nuclear Materials, vol. 470, pp. 297 - 306, 2016.

B. K. Paul, Panat, R., Mastrangelo, C., Kim, D., and Johnson, D., “Manufacturing of Smart Goods: Current State, Future Potential, and Research Recommendations”, J. Micro Nano-Manuf Journal of Micro and Nano-Manufacturing, vol. 4, p. 044001, 2016.

A. Tabei, Shih, D. S., Garmestani, H., and Liang, S. Y., “Micro-texture evolution in aggressive machining of al alloy 7075”, Materials and Manufacturing Processes, vol. 31, pp. 1709–1717, 2016.

B. Palanisamy, Han, S. - Y., and Paul, B. K., “A Multilayer Strategy for Improving the Abrasion Resistance of Silica Nanoparticle-Based Motheye Antireflective Coatings on Glass”, Journal of Micro and Nano-Manufacturing, vol. 4, p. 031005, 2016.

V. Chalishazar, “Nanostructured Optical Devices for Biosensing Applications”, Oregon State University, Corvallis, Or., 2016.

A. Mirkouei, Bhinge, R., McCoy, C., Haapala, K. R., and Dornfeld, D. A., “A Pedagogical Module Framework to Improve Scaffolded Active Learning in Manufacturing Engineering Education”, PROMFG Procedia Manufacturing, vol. 5, pp. 1128-1142, 2016.

Y. Liu, “Quantum Dots-Fullerene Based Molecular Beacons for Highly Sensitive DNA Detection”, Oregon State University, Corvallis, Or., 2016.

A. Mirkouei, Mirzaie, P., Haapala, K. R., Sessions, J., and Murthy, G. S., “Reducing the cost and environmental impact of integrated fixed and mobile bio-oil refinery supply chains”, Journal of cleaner production, vol. 113, pp. 495-507, 2016.

A. J. Alsaffar, Raoufi, K., Kim, K. - Y., Kremer, G. E. Okudan, and Haapala, K. R., “Simultaneous Consideration of Unit Manufacturing Processes and Supply Chain Activities for Reduction of Product Environmental and Social Impacts”, Journal of Manufacturing Science and Engineering, vol. 138, pp. 101009-101009-18, 2016.

S. Pasebani, Charit, I., Butt, D. P., Cole, J. I., Wu, Y., and Burns, J., “Sintering Behavior of Lanthana-Bearing Nanostructured Ferritic Steel Consolidated via Spark Plasma Sintering”, ADEM Advanced Engineering Materials, vol. 18, pp. 324-332, 2016.

S. Tajima, Sencer, B., and Conference, A. S. M. E. 2016 11th, “Smooth Cornering Strategy for High Speed CNC Machine Tools With Confined Contour Error”, p. V002T04A034, 2016.

Y. A. Alemu, “Synthesis, Surface Treatment, and Characterization of Copper Indium Sulfide Quantum Dots”, Oregon State University, Corvallis, Or., 2016.

I. C. Garretson, Mani, M., Leong, S., Lyons, K. W., and Haapala, K. R., “Terminology to support manufacturing process characterization and assessment for sustainable production”, Journal of cleaner production, vol. 139, pp. 986-1000, 2016.

M. D. Bunn, “Aging and Performance Evaluation of Marine Antifouling Coatings”, Oregon State University, Corvallis, Or., 2015.

S. Jeknic, “Alteration of flower color in Solanum lycopersicum through ectopic expression of a gene for capsanthin-capsorubin synthase from Lilium lancifolium”, Oregon State University, Corvallis, Or., 2015.

J. D. Tucker, Miller, M. K., and Young, G. A., “Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications.”, 2015.

J. D. Tucker, Miller, M. K., and Young, G. A., “Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications”, Acta Materialia, vol. 87, pp. 15–24, 2015.