Publications

2016

Ahmed J. Alsaffar, Kamyar Raoufi, Kyoung-Yun Kim, Gül E.Okudan Kremer, Karl R. Haapala, (2016), Simultaneous Consideration of Unit Manufacturing Processes and Supply Chain Activities for Reduction of Product Environmental and Social Impacts, ASME, Journal of Manufacturing Science and Engineering, 138
Brian K. Paul, Rahul Panat, Christina Mastrangelo, Dave Kim, David Johnson, (2016), Manufacturing of Smart Goods: Current State, Future Potential, and Research Recommendations, J. Micro Nano-Manuf Journal of Micro and Nano-Manufacturing, 4
Kremer G.E., Karl R. Haapala, Murat A., Chinnam R.B., Kim K.-Y., et al., (2016), Directions for instilling economic and environmental sustainability across product supply chains, J. Clean. Prod. Journal of Cleaner Production, 112
Tomoya Aoki, Burak Sencer, Eiji Shamoto, Norikazu Suzuki, Tomio Koide, (2016), Development of a high-performance chip-guiding turning process—tool design and chip flow control, The International Journal of Advanced Manufacturing Technology, 85
Sultan Alsagabi, Indrajit Charit, Somayeh Pasebani, (2016), The Irradiation Performance and Microstructural Evolution in 9Cr-2W Steel Under Ion Irradiation, Springer US, Journal of Materials Engineering and Performance, 25
Aniket K. Dutt, Somayeh Pasebani, Indrajit Charit, Rajiv S. Mishra, (2016), On the creep behavior of dual-scale particle strengthened nickel based alloy, MSA Materials Science & Engineering A, 676
A Tabei, DS Shih, H Garmestani, SY Liang, (2016), Dynamic Recrystallization of Al Alloy 7075 in Turning, Journal of Manufacturing Science and Engineering, 138
Barath Palanisamy, Seung-Yeol Han, Brian K. Paul, (2016), A Multilayer Strategy for Improving the Abrasion Resistance of Silica Nanoparticle-Based Motheye Antireflective Coatings on Glass, Journal of Micro and Nano-Manufacturing, 4
Gao Q., Brian K. Paul, Karl R. Haapala, Lizarazo-Adarme J., (2016), An economic and environmental assessment model for microchannel device manufacturing: Part 1 - Methodology, J. Clean. Prod. Journal of Cleaner Production, 120
Somayeh Pasebani, Charit I., Alsagabi S.F., Wu Y., Burns J., et al., (2016), Lanthana-bearing nanostructured ferritic steels via spark plasma sintering, J Nucl Mater Journal of Nuclear Materials, 470
Amin Mirkouei, Raunak Bhinge, Chris McCoy, Karl R. Haapala, David A. Dornfeld, (2016), A Pedagogical Module Framework to Improve Scaffolded Active Learning in Manufacturing Engineering Education, PROMFG Procedia Manufacturing, 5
Amin Mirkouei, Pantea Mirzaie, Karl R. Haapala, John Sessions, Ganti S. Murthy, (2016), Reducing the cost and environmental impact of integrated fixed and mobile bio-oil refinery supply chains, Journal of cleaner production, 113
Elham Bagherisereshki, (2016), Carbonation Kinetics of SrO By CO2 for Solar Thermochemical Energy Storage, Oregon State University,
Harish Irrinki, Michael Dexter, Brenton Barmore, Ravi Enneti, Somayeh Pasebani, et al., (2016), Effects of Powder Attributes and Laser Powder Bed Fusion (L-PBF) Process Conditions on the Densification and Mechanical Properties of 17-4 PH Stainless Steel, Springer US, JOM, 68
Patrick Scot McNeff, (2016), Force Prediction in the Compression Sealing of an Ultra-thin Elastoviscoplastic Membrane, Oregon State University,
Lucas Teeter, (2016), Corrosion of Carbon and Stainless Steels in H2O-sCO2 Environments for Power Cycle Applications, Oregon State University,
Gao Q., Brian K. Paul, Karl R. Haapala, Lizarazo-Adarme J., (2016), An economic and environmental assessment model for microchannel device manufacturing: Part 2 - Application, J. Clean. Prod. Journal of Cleaner Production, 120
A Dominguez, A Ali, F Orantes, N Ula, Y Li, et al., (2016), Evaluation of the Microstructure and Charpy Impact Toughness of Hot Worked Powder Ti-6Al-4V, Trans Tech Publ, Defect and Diffusion Forum,
Vishvas Chalishazar, (2016), Nanostructured Optical Devices for Biosensing Applications, Oregon State University,
Yuanyuan Wu, (2016), Carbon Nanodots as Biolabels for Fluorescence Immunoassays, Oregon State University,
Shingo Tajima, Burak Sencer, ASME 2016 11th Conference, (2016), Smooth Cornering Strategy for High Speed CNC Machine Tools With Confined Contour Error,

2015

Burak Sencer, Kosuke Ishizaki, IECON 2015 . 41 Society, (2015), Smooth polynomial interpolation for point-to-point trajectories with vibration avoidance,
Burak Sencer, Kosuke Ishizaki, Eiji Shamoto, (2015), High speed cornering strategy with confined contour error and vibration suppression for CNC machine tools, CIRP Annals, 64
Erfan Rasouli, (2015), Single Phase and Flow Boiling Heat Transfer and Flow Characterization in Microscale Pin Fin Heat Sinks, Oregon State University, Ph.D.
Fei Teng, Julie D. Tucker, (2015), Role of Stoichiometry on Ordering in Ni-Cr Alloys, MRS Online Proceedings Library Archive, 1809
Somayeh Pasebani, Indrajit Charit, Jatuporn Burns, Sultan Alsagabi, Darryl P. Butt, et al., (2015), Microstructural stability of a self-ion irradiated lanthana-bearing nanostructured ferritic steel, NUMA Journal of Nuclear Materials, 462
A Tabei, DS Li, Curt A. Lavender, Hamid Garmestani, (2015), Investigation of precipitate refinement in Mg alloys by an analytical composite failure model, Mechanics of Materials, 89
Stevan Jeknic, (2015), Alteration of flower color in Solanum lycopersicum through ectopic expression of a gene for capsanthin-capsorubin synthase from Lilium lancifolium, Oregon State University, H.B.S.
Peter William Ray, (2015), Characterization of Carboxylic Acids on Hafnium Oxide Thin Films, Oregon State University, M.S.
Julie D. Tucker, M. K. Miller, G. A. Young, (2015), Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications.,
Michael D. Eastwood, Karl R. Haapala, (2015), A unit process model based methodology to assist product sustainability assessment during design for manufacturing, Journal of cleaner production, 108
JD Tucker, MK Miller, GA Young, (2015), Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications, Acta Materialia, 87
Goran N. Jovanovic, James E. Atwater, Polona Znidarsic-Plazl, Igor Plazl, (2015), Dechlorination of polychlorinated phenols on bimetallic Pd/Fe catalyst in a magnetically stabilized fluidized bed, CEJ Chemical Engineering Journal, 274
A Tabei, DS Shih, H Garmestani, SY Liang, (2015), Derivation of Process Path Functions in Machining of Al Alloy 7075, Journal of Materials Engineering and Performance, 24
Brian K. Paul, Porter S.D., (2015), Self-registration methods for increasing membrane utilization within compression-sealed microchannel hemodialysers, J. Manuf. Processes Journal of Manufacturing Processes, 16
David A. Garfinkel, Jonathan D. Poplawsky, Wei Guo, George A. Young, Julie D. Tucker, (2015), Phase separation in lean-grade duplex stainless steel 2101, Jom, 67
Somayeh Pasebani, Aniket K. Dutt, Jatuporn Burns, Indrajit Charit, Rajiv S. Mishra, (2015), Oxide dispersion strengthened nickel based alloys via spark plasma sintering, MSA Materials Science & Engineering A, 630
Malachi D. Bunn, (2015), Aging and Performance Evaluation of Marine Antifouling Coatings, Oregon State University,
Somayeh Pasebani, Indrajit Charit, Rajiv S. Mishra, (2015), Effect of tool rotation rate on constituent particles in a friction stir processed 2024Al alloy, MLBLUE Materials Letters, 160

2014

Weekit Sirisaksoontorn, (2014), Graphite intercalation compounds containing tetra-n-alkylammonium cations, Oregon State University, Ph.D.
K. R. Haapala, P. Prempreeda, (2014), Comparative life cycle assessment of 2.0 MW wind turbines, INTERNATIONAL JOURNAL OF SUSTAINABLE MANUFACTURING, 3
Julie D. Tucker, (2014), Solute-Vacancy Interactions in Nickel, MRS Online Proceedings Library Archive, 1645
Somayeh Pasebani, Aniket K. Dutt, Indrajit Charit, Rajiv S. Mishra, (2014), Nickel-Chromium Alloys: Engineered Microstructure via Spark Plasma Sintering, Trans Tech Publications, Materials Science Forum, 783-786
Yousef M. Alanazi, (2014), Oxidation of hydrocarbon in a carbon nanotube supported corona discharge in micoreactor: oxidation of ethylene,
Jaeseok Heo, (2014), New multi-functional chalcogenides for photovoltaic and thermoelectric materials, Oregon State University, Ph.D.
Daniel A. Peterson, C Padmavathi, Brian K. Paul, (2014), High production rate synthesis of cds nanoparticles using a reverse oscillatory flow method, Journal of Micro and Nano-Manufacturing, 2
Ratih E. Lusianti, (2014), Improving the post-thaw processing of cryopreserved red blood cells using a combined approach of mathematical modeling and microfluidics, Oregon State University,
Daniel Alan Peterson, (2014), Fluidic and thermal modeling for the high production rate synthesis of high quality nanoparticles, Oregon State University,
Frederick Williams Atadana, (2014), Production of biohydrodeoxygenated diesel in a novel microscale reactor : experiments and modeling, Oregon State University,
Somayeh Pasebani, Indrajit Charit, (2014), Effect of alloying elements on the microstructure and mechanical properties of nanostructured ferritic steels produced by spark plasma sintering, Elsevier B.V., Journal of Alloys and Compounds, 599