Advanced Technology and Manufacturing Institute (ATAMI)

H. Zhang, “Integrating sustainable manufacturing assessment into decision making for a production work cell”, Oregon State University, Corvallis, Or., 2012.

H. Zhang, Calvo-Amodio, J., and Haapala, K. R., “A conceptual model for assisting sustainable manufacturing through system dynamics”, Journal of Manufacturing Systems, vol. 32, pp. 543 - 549, 2013.

K. R. Zada, “Experimental Investigation of Supercritical Heat Transfer of Carbon Dioxide in Parallel Square Microchannels with a Single-Wall Constant Heat Flux Boundary Condition”, Oregon State University, Corvallis, Or., 2017.

G. A. Young, Tucker, J. D., and Eno, D. R., “The kinetics of long range ordering in Ni-Cr and Ni-Cr-Fe alloys”, in Proceedings of the 16th Annual Conference on the Environmentally Assisted Cracking of Materials in Nuclear Power Systems-Water Reactors, 2013.

J. S. Yih, “The geometric characterization and thermal performance of a microchannel heat exchanger for diesel engine waste heat recovery”, Oregon State University, Corvallis, Or., 2011.

Y. Wu, “Carbon Nanodots as Biolabels for Fluorescence Immunoassays”, Oregon State University, Corvallis, Or., 2016.

A. Warner-Tuhy, “Mass transfer of urea, creatinine and vitamin B-12 in a microchannel based membrane separation unit”, Oregon State University, Corvallis, Or., 2009.

C. Ward, “Design and performance of a small scale waste heat recovery unit”, Oregon State University, Corvallis, Or., 2012.

W. Wang, “Selective self-assembly of biogenic silica assisted by layer-by-layer deposition and inkjet printing”, Oregon State University, Corvallis, Or., 2008.

H. Wang, “An experimental study of flow boiling heat transfer enhancement in minichannels with porous mesh heating wall”, Oregon State University, Corvallis, Or., 2006.

H. Wang, Shao, Z., Fan, Z., Han, Z., Instrumentation, 2018I. E. E. E. Inter, and I2MTC, M. Technology, “Optimization of laser trackers locations for position measurement”, pp. 1-6, 2018.

P. Wang, Fan, Z., Kazmer, D. O., and Gao, R. X., “Orthogonal Analysis of Multisensor Data Fusion for Improved Quality Control”, J. Manuf. Sci. Eng Journal of Manufacturing Science and Engineering, vol. 139, p. 101008, 2017.

J. H. Vlieg, “Development of a radial microlamination architecture for cylindrical microchannel arrays”, Oregon State University, Corvallis, Or., 2010.

P. Vas-Umnuay, “Flow characterization of multiple-tube reactors for synthesis of nano-sized silicon nitride powder via silicon monoxide ammonolysis”, Oregon State University, Corvallis, Or., 2008.

J. D. Tucker, Miller, M. K., and Young, G. A., “Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications.”, 2015.

J. D. Tucker, Miller, M. K., and Young, G. A., “Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications”, Acta Materialia, vol. 87, pp. 15–24, 2015.

J. D. Tucker, “Solute-Vacancy Interactions in Nickel”, MRS Online Proceedings Library Archive, vol. 1645, 2014.

S. K. Tiwari, “Nickel nanoparticles-assisted diffusion brazing of stainless steel 316 for microfluidic applications”, Oregon State University, Corvallis, Or., 2010.

F. Teng and Tucker, J. D., “Role of Stoichiometry on Ordering in Ni-Cr Alloys”, MRS Online Proceedings Library Archive, vol. 1809, pp. 7–12, 2015.

F. Teng, “Investigation of Thermal Degradation in Structural Alloys for Nuclear Power Systems”, Oregon State University, Corvallis, Or., 2018.

L. Teeter, “Corrosion of Carbon and Stainless Steels in H2O-sCO2 Environments for Power Cycle Applications”, Oregon State University, Corvallis, Or., 2016.

S. Tajima, Sencer, B., and Conference, A. S. M. E. 2016 11th, “Smooth Cornering Strategy for High Speed CNC Machine Tools With Confined Contour Error”, p. V002T04A034, 2016.

S. Tajima, Sencer, B., and Shamoto, E., “Accurate interpolation of machining tool-paths based on FIR filtering”, Precision Engineering, vol. 52, pp. 332–344, 2018.

S. Tajima and Sencer, B., “Global tool-path smoothing for CNC machine tools with uninterrupted acceleration”, International Journal of Machine Tools and Manufacture, vol. 121, pp. 81–95, 2017.

A. Tabei, Abed, F. H., Voyiadjis, G. Z., and Garmestani, H., “Constitutive modeling of Ti-6Al-4V at a wide range of temperatures and strain rates”, European Journal of Mechanics-A/Solids, vol. 63, pp. 128–135, 2017.