Fabrication and characterization of nanostructured surfaces for enhanced heat transfer

Type
Thesis
Year of Publication
2009
Authors
Changho Choi
Date Published
Jan. 1, 2009
Publisher
Oregon State University
Abstract

This objective of this study is to investigate the capability of nanostructured surfaces on dissipating heat flux by performing pool boiling and convective flow boiling. The generation of ultra-high heat flux from high performance electric devices has motivated a number of investigations related to advanced heat transfer especially in two-phase boiling performance. It has been reported by a number of researchers that nanostructured surfaces can result in much enhanced boiling performance, compared to the conventional methods by creating desire conditions for heat transfer. In this thesis, various nanostructured surfaces having different morphology were prepared on several engineering relevant substrates and were characterized for their pool boiling performance. Microreactor-assisted-nanomaterial-deposition, MAND [trademark symbol] was used to fabricate a variety of different ZnO nanostructured surfaces by careful adjustment of the processing parameters. ZSM-5 zeolite was synthesized using hydrothermal reaction. ZnO nanostructures in minichannel were also successfully deposited via a flow cell for the application of flow boiling experiment. Scanning electron microscopy (SEM) and Atomic Force Microscopy (AFM) were carried out to characterize the micro- and nanostructures. Contact angle measurement was conducted to evaluate wettability and X-ray Diffraction (XRD) was used to determine the crystalline structures. The most significant enhancement of critical heat flux (CHF) and heat transfer coefficient (HTC) was observed in the flower like ZnO nanostructured surface. We observed pool boiling CHF of 80-82.5 W/cm2 for nanostructured ZnO on Al surfaces versus a CHF of 23.2 W/cm2 on a bare Al surface with a wall superheat reduction of 25-38°C. This new CHF values on nanostructured surfaces corresponds to a boiling heat transfer coefficient as high as {\textasciitilde} 23000 W/m2K. This represents an increase of almost 4X in CHF on nano-textured surfaces, which is the highest enhancement factor reported today.